Description and Specification of Pump and Valves and Fittings Test Stand for Lab Tenders

Pump and Valves and Fittings Test Stand

Manufacturers and Suppliers India

Pump and Valves and Fittings Test Stand The typical kinds of valves and fittings are represented by a ball valve, a butterfly valve, a gate valves, a shut-off valve and a control valve. A safety valve and a dirt trap are also investigated. All valves and fittings are flanged, and can be installed in a pipe section with variable length. The pipe section is part of a closed water circuit. Pressure measurement points upstream and downstream of the valve and fitting under test are linked by a differential pressure manometer. This manometer is fitted with a pressure switch which activates a warning lamp if the pressure difference becomes excessive, such as when the filter is clogged. An electromagnetic flow rate sensor permits precise recording of the flow rates. The closed water circuit contains three butterfly valves, to isolate the pump, and to adjust the pressure upstream and downstream of the test fitting. Differential pressures across the pump and test fitting, the power consumption and speed of the pump, and the flow rate and opening angle of the control valve are recorded and displayed. The measured data can also be used to plot pump characteristics. A vice is included, on a separate workbench, for maintenance and assembly work. The workbench also incorporates the necessary tools and connecting hoses. Trainer for testing various valves and fittings Installation of the test fitting in a pipe section of variable length Centrifugal pump with variable speed via frequency converter Fine pressure regulator adjusts compressed air pressure Tank cover as collecting tray under test device Manometers at inlet and outlet of centrifugal pump Pressure measuring points upstream and downstream of test device for differential pressure manometer with pressure switch Digital displays for flow rate, power output, speed, position of control valve Technical Data: Centrifugal pump Power consumption: 4kw Flow rate: 72m³/h Head: 26,5m Speed: 1450...2900rpm Supply tank with cover: capacity: 400L Test valves and fittings: Safety valve 1", 1,5bar Shut-off valve dn50 / pn16 Ball valve with pneumatic drive dn50 Butterfly valve dn50 / pn16 Wedge gate valve dn50 / pn16 Electric control valve dn50 / pn16 Dirt trap dn50 / pn16 with 2 filter elements Measuring ranges Differential pressure manometer: 0...2,5bar / 0...4bar Manometer: 0...4bar / -1...0,6bar Flow rate: 35...1100l/min Opening range of control valve: 0...100% Power output: 0...4000w Speed: 0...2900rpm 400V, 50Hz, 3 phases.

Pump and Valves and Fittings Test Stand Quality Assurance: We being a leading Pump and Valves and Fittings Test Stand manufacturer from India. NaugraLabEquipments are actively involved in providing precision equipments of premium quality to clients across the globe for Testing Lab and TVET Technical Lab, Industial Training Institutions. We always utilize the most advanced and sophisticated technology for production process of Pump and Valves and Fittings Test Stand and supply exceptional range of other products like Pump and Valves and Fittings Test Stand for tender supply from India.

Laboratory Related Products from India

We supply Pump and Valves and Fittings Test Stand for Bidding and Tendering Turnkey Projects. We supply all laboratory products related to Ministry of Education and Ministry of Health, Medical and Hospital Lab Tenders, Material Testing Lab, School Science Scientific Instruments, Lab Teaching and Educational Lab Equipments, TVET Technical and Vocational Education Training Lab. Manufacturers of Pump and Valves and Fittings Test Stand from India.

Supply of Pump and Valves and Fittings Test Stand from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Pump and Valves and Fittings Test Stand suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Pump and Valves and Fittings Test Stand manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Pump and Valves and Fittings Test Stand exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe